Omnia MN-RCV3, Справочное и монтажное руководство

Страница: 18 / 28

16 Reference & Installation Manual
5.0 REMOTE CONTROLS
The Omnia Wireless Receiver Module accepts up to 16 fully programmable remote
controls. Programming the remote controls is accomplished in three steps:
1. Remote controls must be assigned to the Wireless Receiver Module.
2. The remote controls from the Wireless Receiver Module must be assigned to
User Access Codes.
3. The buttons on the remote controls must be programmed.
In Omnia, sections [201] to [216], [040], [041], [301] to [316], and [401] to [416] are
all interrelated. For example, when assigning a remote control to the Receiver
Module:
1. The remote control is assigned using the Automatic Learning method in sections
[201] to [216].
2. The number of remote controls assigned to the Receiver will automatically appear
in sections [040] and [041].
3. The remote control is assigned to User Access Codes in sections [301] to [316].
4. The remote controls’ buttons are programmed in sections [401] to [416].
The remote control will transmit a signal for only 1 second when a button is
pressed. This is done to prolong the remote control’s battery life.
How to set the PGM deactivation mode.
In step 5 in Figure 3.3 on page 7:
1. Enter section [001].
2. Enable or disable options [6] and [7].
Option [6] OFF = PGM1: 2 second timer (default)
Option [6] ON = PGM1: Manually
Option [7] OFF = PGM2: 2 second timer (default)
Option [7] ON = PGM2: Manually