Page 23
Indoor Unit
Installation
Indoor Unit
Installation
4. Fix one end of the electric heating terminal
board to the sheet metal slot close to the
fan, and the other end to the sheet metal
on the top cover plate with two screws.
3. Install the electric heating wire in the reserved
position for electric heating modules
，
ensure that the pointed fork at one end is
inserted into the reserved hole position, and
the other end is at the fixed position of
the electric heating sheet metal with screws.
5. Remove the electric control box cover sheet
metal (after completing the following steps,
the electric control box cover needs to be
installed)
6. Insert the white plug of the electric heating
control line into the electric control box along
the recessed channel and plug into the
adjoining connector.
