Omni 24K, Руководство пользователя и инструкция по установке

Страница: 11 / 41

Static Pressure
EXTERNAL STATIC PRESSURE (in.w.c.)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Model
24K
48K
36K
SP1 975 1076 675 853 / 502 / / /
1175 1250 965 1075 650 815 / / /
1415 1490
1250 1334 1028 1156
1756 1825 1592 1670 1450 1515
1270 1335 1062 1165 810 950
1405 1475 1230 1320 990 1125
1585 1648 1440 1515 1235 1354
1733 1815 1605 1663 1435 1528
1530 1611 1375 1462 1170 1276
1701 1774 1570 1642 1420 1504
1805 1868 1675 1736 1532 1604
1974 2024 1850 1919 1726 1795
750
1250
450
715
990
1235
925
1202
1330
1560
600
1120
240
570
875
1130
831
1081
1211
1466
880
1360
645
855
1125
1346
1025
1313
1433
1652
SP2
SP3
SP4
SP1
SP2
SP3
SP4
SP1
SP2
SP3
SP4

Page 11

Indoor Unit
Parts And
Major Functions
Static pressure selection ( For RG57 Remote Controller )
•
•
MODE
FAN
TEMP
SLEEP
L
SWING DIRECT
ED
TURBO
ON/OFF
TIMER
ON
TIMER
OFF
SHORT
CUT
The indoor unit should be operated within 10 minutes after
installation.
During the first 30 seconds after power on, press and hold the
following three buttons: MODE, FAN, and TIMERON; or the two
buttons of MODE and TIMERON for 5 seconds.
Step1 : Press “
△
” or “
▽
” to select the E9.
Step2 : Press “MODE” to set the air ow rate in the range of 1~4.
“1”~“4”
：
Air
ow increase progressively
Step3 : Press “MODE” to confirm , than Press “TIMERON ”to finish the air flow setting.
Step4 : Remove the remote controller battery, and then assemble the battery after the remote
controller screen is not displayed. The remote controller exits the modification mode.
After restarting, the machine will keep the setting's value.
AIR FLOW DATA (CFM)
NOTE:
1. This function is only suitable for debugging the machine with the RG57 remote controller. Changing
this only allows for professional installers to operate.
2. During the static pressure test, it is necessary to assemble the upper cover of the unit, otherwise
there may be deviations in the calculated data.
3. The remote controller is only allowed for static pressure debugging and static pressure test functions.
4. Illustrations in this manual are for explanatory purposes. The actual shape of your remote controller
may be slightly different.
5. Sp1 applies static pressure of 0~0.2 in w.c
Sp2 applies static pressure of 0.2~0.4 in w.c
Sp3 applies static pressure of 0.4~0.6 in w.c
Sp4 applies static pressure of 0.6~0.8 in w.c