8
Parameter
Set-up Information
SEt
OPEr
PRESS
TO SKIP TO NEXT MENU ITEM
PRESS
TO SELECT OPERATION MODE
This allows the enabling or disabling of the power save mode, which updates at
1 reading per second and pulses the sensor excitation. This results in a lower
accuracy (1 digit in 10,000).
To enable press
.
To disable press
AUtO
OFF
PRESS
TO SKIP TO NEXT MENU ITEM
PRESS
TO SET AUTO POWER OFF
This enables the setting of an auto power off value. The value entered is in
minutes. If no front panel buttons are pressed for the time set here, then the
indicator will automatically power off to conserve battery life.
Values between
05
and
99
can be entered (
00
leaves the TR150 permanently
powered), using the
and
buttons to select a digit and the
and
buttons to increment or decrement the digits. Press
to accept the value and
move onto the next parameter.
rS232
PRESS
TO SKIP THIS PARAMETER AND EXIT MENU
PRESS
TO ENABLE THE RS232 OUTPUT
This feature allows you to enable or disable the RS232 output. Further details
of the RS232 format are provided on page 13 of this manual. The RS232
output is an option that has to be ordered with the TR150. To conserve battery
life, it is suggested that the RS232 output is disabled when it is not required.
To enable press
.
To disable press
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
[email protected]
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
www.omniinstruments.net
