7
CONFIGURATION MENU
To enter the
CONFIGURATION MENU
, press and hold
and
buttons for 3 seconds.
Parameter
Set-up Information
SEt ZEro
PRESS
TO SKIP TO NEXT MENU ITEM
PRESS
TO SET A NEW SYSTEM ZERO
This allows the user to introduce a fixed offset to the display value. The
GROSS and NET values are then displayed with this offset taken into account.
Values between
-9999999
and
+9999999
can be entered, using the
and
buttons to select a digit and the
and
buttons to increment or
decrement the digits. Press
to accept the value and move onto the next
parameter.
SEt rAtE
PRESS
TO SKIP TO NEXT MENU ITEM
PRESS
TO CHANGE THE UPDATE RATE
This allows the user to set the display update rate. The options available are
the update rates of the display in Hz. Please note that the 25Hz update is only
available in
PEAK
or
TROUGH
mode.
When you choose to change the update rate, you will be prompted whether
you want to select 25Hz. If you do not, press
. You will then be prompted to
select any of the other values which, in order, are 10Hz, 3Hz, 1Hz, 0.5Hz. To
set the update rate for the value you want, press
.
SEt
OUEr
PRESS
TO SKIP TO NEXT MENU ITEM
PRESS
TO SET OVERLOAD ALARM
This allows the setting of a visual overload. The value entered is the display
value at which the TR150 flashes
OUErLOAd
.
Values between
-9999999
and
+9999999
can be entered, using the
and
buttons to select a digit and the
and
buttons to increment or
decrement the digits. Press
to accept the value and move onto the next
parameter.
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
[email protected]
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
www.omniinstruments.net
