2
INTRODUCTION
The TR150 Portable Strain Display Load Cell/Force transducer readout is a
microprocessor based portable instrument designed to interface with any full bridge sensor
with an output sensitivity of up to 50mV/V. Bridge resistances from 85
Ω
upwards can be
used with the TR150.
Configuration and calibration of the TR150 is achieved using the front panel push buttons
to navigate through a very simple menu structure.
User functions available on the TR150 include:-
•
Range
Selection
•
Display
Hold/Freeze
•
Gross/Net indication selection
•
Peak Hold selection
•
Trough Hold selection
•
Shunt
Cal
check
The TR150 is powered by two internal non-rechargeable AA alkaline batteries.
There is an option to have rechargeable alkaline batteries, which can be charged without
the need for removing them from the TR150.
USER OPERATION
Important Note
The unit is supplied calibrated to a particular load cell. All user functions are available via
the front keypad. Do not attempt to re-calibrate the TR150, unless you are authorised and
have the equipment available to do so.
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
[email protected]
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
www.omniinstruments.net
