OMERA I003203, Руководство по эксплуатации и обслуживанию

Страница: 7 / 50

OIL-HYDRAULIC PRESSES WITH TWO UPRIGHTS
OPERATION AND MAINTENANCE MANUAL 7
3. EXPECTED USE CONDITIONS
3.1 BEFORE OPERATING THE MACHINE
Before carrying out any installation operation and/or using the machine, the instructions in this manual should
be read thoroughly and adhered to. Current regulations relating to accident prevention and safety in the
workplace should also be observed.
The warnings given to safeguard personnel working on the machine are classified in this manual under special
headings, the meaning of which is given below:
NOTE: this introduces important information relating to the product, the use of the product or part of
this manual which demands special attention.
CAUTION: this means that minor injury or damage may result if the relevant safety regulations are not
observed.
DANGER: this means that death, serious injury or damage may result if the relevant safety regulations
are not observed.
In order to quickly identify the type of professional person who has an interest in reading this manual, the
following symbols have been used:
OPERATOR: the person in charge of operating the machine for production
purposes.
The operator is familiar with the measures taken by the
manufacturer of the machine to eliminate sources of safety
hazards in the workplace and observes the operation rules.
HOOK-UP MAN: The person in charge of handling the machine or parts of the
machine. The hook-up man is aware of the possible difficulties
regarding the safe transportation of the machine or parts of the
machine; for this reason adequate lifting equipment should be
used, in compliance with the instructions supplied by the
manufacturer of the machine.
FITTER: the person in charge of preparing the machine for normal
operation. The fitter is familiar with the measures taken by the
manufacturer of the machine to eliminate sources of safety
hazards in the workplace and observes the operation rules. The
fitter should take the necessary precautions so that he is
working in totally safe conditions.
MAINTENANCE ENGINEER: the person in charge of carrying out maintenance on
the machine. The maintenance engineer is aware of possible
hazards that may arise during his work and takes the necessary
precautions to prevent the risks of accidents in the workplace.
ELECTRICIAN: the person in charge of carrying out maintenance operations on
the electrical system of the machine. The electrician is aware of
possible hazards that may arise during his work and takes the
necessary precautions to prevent the risk of accidents in the
workplace.