Omegawave COACH, Руководство пользователя

Страница: 27 / 50

26
MEASURING – QUICK GUIDE
General rules
•
To achieve comparable results, measure your athletes in the same way each time.
•
If interrupted for any reason, cancel the measurement.
•
If measuring after exercise, wait at least 30 minutes.
Measurement instructions
1. Pair the Omegawave sensor in the application (needs to be done only once).
2. Thoroughly wet the ECG chest strap pads with water and only use new gelled electrodes.
3. Attach the belt and sensor as instructed.
4. Athlete should lie down flat on your back, relax and breathe normally.
5. Begin the measurement immediately upon athlete has laid down.
6. The application will sound when the measurement is complete.
NOTE
There are two measurement types available:
- ECG only
- ECG + DC Potential (requires a subscription that allows you to measure DC Potential)
Completing only a DC Potential measurement is not supported.
NOTE
It is possible to do measurements without Internet connection, but the results will be calculated only
when the connection is available. You will see a blue dot indicator next to athlete indicating that you
have done measurement(s) for the athlete(s) which are not yet calculated.