23
IMPORTANT!
Follow this protocol when dressing the chest strap, sensor and DC electrodes to avoid bending the
micro-USB connector:
1.
Thoroughly wet the chest strap electrodes and wear it
2.
Attach the DC electrodes to the hand and the forehead
3.
Attach the DC cable to the DC electrodes on the body
4.
Attach the DC cable to the sensor
5.
Go to
Measure
view
6.
Attach the sensor to the chest strap
7.
Wait until the application detects data from the sensor
8.
Lay down
9.
Start the measurement immediately
10.
After the measurement is done, take sensor from the chest strap before standing up
11.
Remove the DC cable from the sensor
The picture below shows an athlete with the hardware properly attached (left hand dominant).
Содержание COACH
Страница 1: ...COACH USER GUIDE...
