29 |
P a g e
Appendix D: Mounting your XW Transmitter
Step 1:
Position the unit where you would like to mount it.
Mark the location of the top center of the unit.
Step 2:
Unscrew the lid screw using a Philips head screwdriver to
open the XW Transmitter and access the mounting points.
Step 3:
Refer to Figure 24 to mark and drill four pilot holes
as indicated. Use the included drywall anchors if needed.
Step 4:
Use the included screws to secure the XW Transmitter.
Tip:
When mounting the unit, be sure to leave room on the
top to access the power button and on the bottom and
side for the probe and antenna.
Tip:
Mount the unit away from any large metal obstructions
such as posts, catwalks, or large machinery.
Tip:
For the best wireless range do not collocate the XW
Transmitter with other 2.4Ghz wireless equipment such as
Bluetooth, Zigbee, or any other wireless router or access
points not belonging to the same wireless network.
Figure 40
Figure 41
