17 |
P a g e
Process Input
The XW-ED can also accept up to two 0-24 mA or 0-1.0 V
DC
process inputs. Select either
Single
Process
or
Dual Process
from the Type selection and then choose the Device Range/Type option in the side bar.
Note:
When using Dual Process, the Device Range/Type section is only available for Input 0. Input 1 is always the
same type as Input 0.
Warning:
Be sure to setup the unit before plugging in Process inputs.
Frequency, Pulse
Width, Duty Cycle
Pin 1
NC
Pin 2
Input 1
Pin 3
Input 0
Pin 4
NC
Pin 5
Shield
Pin 6
NC
Pin 7
GND
Pin 8
3.3V Output
Figure 28
Figure 29
Rear view of Filed Connector Shown
