manualshive.com logo in svg

Omega PCL1200, Руководство пользователя, Страница: 46 / 60

Поделиться
Скачать
Omega PCL1200 Скачать руководство пользователя страница 46

42

CPRT_COEFA

This command is used for entering a custom RTD into the calibrator. 
The numeric value entered after the command will be set as the first 
coefficient of the polynomial used by the custom RTD.

For example:
 

CPRT_COEFA 3.908E-03  

enters 3.908e-3 as coefficient A.

CPRT_COEFA?

Returns the number which was entered for the first coefficient of the 

polynomial used in the custom RTD. Using the example above 
CPRT_COEFA? Would return: 
 

3.908000E-03

CPRT_COEFB

This command is used for entering a custom RTD into the calibrator. 
The numeric value entered after the command will be set as the 
second coefficient of the polynomial used by the custom RTD.

For example:
 

CPRT_COEFB -5.8019E-07 enters -5.8019e-7 as coefficient B.

CPRT_COEFB?

Returns the number, which was entered for the first coefficient of the 

polynomial used in the custom RTD. Using the example above, 
CPRT_COEFB? Would return: 
 

-5.801900E-07

CPRT_COEFC

This command is used for entering a custom RTD into the calibrator. 
The numeric value entered after the command will be set as the first 
coefficient of the polynomial used by the custom RTD.

For example:
 

CPRT_COEFC -5.8019E-12 enters -5.8019e-12 as coefficient A.

CPRT_COEFC?

Returns the number which was entered for the first coefficient of the 

polynomial used in the custom RTD. Using the example above 
CPRT_COEFC? Would return: 
-5.801900E-12

Содержание PCL1200





























































Отзывы:

Нет отзывов