9-1
Approval, Regulatory Compliance
9
Section 9 – Approvals, Regulatory Compliance
All approvals outlined in this manual are based on testing
that was done with antennas that are supplied with your
meter. Removing and or installing a different antenna will
void the product compliance demonstrated in these
documents.
9.1 FCC (Domestic Use)
For United States:
FCC ID: OUR-XBEEPRO
For Canada:
IC #4214A-XBEEPRO
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1.) This device may not cause harmful interference.
2.) This device must accept any interference received, including interference that
may cause undesired operation.
To satisfy FCC RF exposure requirements for mobile
transmitting devices, a separation distance of 20 cm or more
should be maintained between the antenna of this device and
persons during device operation. To ensure compliance,
operations at closer than this distance is not recommended.
The antenna used for this transmitter must not be co-located
in conjunction with any other antenna or transmitter.
It is your (the user’s) responsibility to ensure that these
products are operated within the guidelines here in this
manual and in conformance with all local, state, federal or
national regulations and laws of the country they are being
operated in.
Transmitting Power
- Your Wireless Series System
Components have been designed, manufactured and tested
so that the transmitting power of your wireless meter will not
exceed 10 dBm.
NOTE:
NOTE:
NOTE:
WARNING:
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
