Section 2 – Hardware
It is important that you read this manual completely and follow all safety
precautions before operating this instrument.
2.1 Unpacking & Inspection
Remove the packing list and verify that you have received all your equipment. If
you have any questions about the shipment, please call our Customer Service
Department at 1-800-622-2378 or 203-359-1660. We can also be reached on the
Internet at www.omega.com, e-mail: [email protected]. When you receive the
shipment, inspect the container and equipment for any signs of damage. Note
any evidence of rough handling in transit. Immediately report any damage to
the shipping agent.
The carrier will not honor any damage claims unless all
shipping material is saved for inspection. After examining
and removing contents, save packing material and carton in
the event reshipment is necessary.
2.2 Included Items
The following items are supplied in the box.
• 1 MDS-DTM-RTD Series Benchtop Meter
• 1 User’s Guide
• 1 USB Programming Cable
• 1 Setup Utility Software Disk
• 2 D Size Alkaline Batteries
• Mating Connector (M8 and M12 modles only)
• Universal DC Power Adapter
2.3 DC Power and Battery Connection
2.3.1 Operation
Your Benchtop Meter will operate from 12 Vdc to 24 Vdc.
2.3.2 Power Adaptor
A universal power Adaptor has been included with your unit.
DC Power Input Cord
Universal Adaptor 100-240 Vac
2-1
Hardware
2
NOTE:
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
