23 of 36
Header Name
Follow the steps below to edit the Header Name.
Keystroke
Display
1.
From the Measure Mode
press the PRGM key.
Top line reads “PROGRAM
MODE” and bottom line
reads “UNITS SELECT”.
2.
Press the
arrow key
twice.
Bottom line changes to
“USER INFO SELECT”.
3.
Press the PRGM key.
Bottom line shows serial
number.
4.
Press the
arrow key
five times.
Top line reads “HEADER
NAME” and bottom line
reads “text”. The cursor
flashes at bottom left.
5.
If header is correct press
backspace key. If editing
is desired proceed to step
7.
Top line reads “PROGRAM
MODE” and bottom line
reads “USER INFO
SELECT”.
6.
Press the
arrow key.
Returns to Measure Mode.
7.
Press the
or
arrow
keys to set the correct
alpha-numeric value.
Displays a number between 0
and 9, a letter from A to Z, /
or a blank space.
8.
Press the
arrow key to
accept entry.
Cursor advances one space to
right.
9.
Repeat steps 8 and 9 until
the desired Header is
shown.
10.
If an error is made press
the back arrow key until
the cursor is over the
incorrect value. Follow
step 8 to correct. Press the
arrow key to advance
the cursor without
changing values.
11.
When the Header is
complete press the PRGM
key until header accepted.
Top line reads “PROGRAM
MODE” and bottom line
reads “UNITS SELECT”.
12.
Press the
arrow key.
Returns to Measure Mode.
Содержание HHP360 Series
Страница 1: ......
