Omega HHP360 Series, Руководство пользователя

Страница: 13 / 36

13 of 36
Units Select
The standard engineering units available on the HHP360 Precision
Absolute Manometer are:
inches of Mercury at 0° C (in Hg @ 0° C)
millimeters of Mercury at 0° C (mm Hg @ 0° C)
PSI
milliBars (mBar)
Bars
kPa
Torr
Feet (Altitude displays)
Meters (Altitude displays)
To change the engineering units the manometer should be “ON”
and in Measure Mode. Then follow these steps:
Keystroke Display
1. Press the PRGM key.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
2. Press the PRGM key.
Top line reads “UNITS
SELECT” and bottom line shows
current engineering units.
3. Press the

or

arrow key until
desired engineering
unit is displayed.
Engineering units on bottom line
of display change.
4. Press the PRGM key
to select the
engineering unit.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
5. Press the

arrow
key.
Bottom line reads “EXIT”.
6. Press the PRGM key.
Display returns to Measure Mode
in new engineering unit.