20
Max Flow Rate:
The flow rate at which the analog output should be at its max.
Max Flow Units:
Selects what unit to scale flow in.
*Flow units will affect Max Flow Rate. Verify both after changing flow units.
Max Flow Time Base:
Can be set to Sec, Min, Hours, and Days.
*Time base will affect the Max Flow Rate. Verify max flow rate is correct after changing
time base.
Bluetooth Name:
The name that will appear when searching for the device.
Connection will be lost after changing the Bluetooth name and will require
reconnection. Name is limited to 19 characters. Some characters on the phone
are invalid to use. Examples: $, %, ^ symbols
Output Settings
Forced Outputs
This menu will provide the option to force one or both outputs to a certain value.
Along with this ability, Voltage output type will also be selectable. (Figure 5)
To activate, Move the slider to the right. Enter
in desired forced output and press SET to store
information.
*Note: Forced output will not output a value when only
being powered by USB. Information will not be stored
until SET is pressed and forced value will revert back to
previous value or state if output value is outside of the
range.
Forced output limitations:
When forcing an output, it
must be in between the analog out specifications and
will go to the third decimal place.
Ex. 4-20mA output Forced output: 6.25mA
0-10V output Forced output: 7.5V
Digital Output Settings
Input Source
– User can choose between 5
digital input sources depending on sensor version.
Input sources include: Signal 1, Signal 2, Signal
1+2, Direction, and Limit. See page 16 for further
descriptions.
Figure 11: Output
Settings
Содержание FPD-4000 Series
Страница 26: ......
