![background image](http://html2.mh-extra.com/html/omega/dp26-rtd/dp26-rtd_user-manual_4044223014.webp)
6
2.4 FRONT OF THE METER (Continued)
METER BUTTONS
SETPTS
Button
In the run mode, press this button to sequentially recall the previous setpoint settings.
After using the
/T1/T2
and
/DEV
buttons to alter these settings as desired, press
the
SETPTS
button to store these new values.
Unless you press the
SETPTS,
/T1/T2
or
/DEV
button within 20 seconds to
store your input, the meter will scroll to setpoint 2 the return to the run mode.
If the dual relay option is not installed or if the “L.3=1” on the “LK.CF” menu, pressing
the
SETPTS
button will display the meter's firmware version.
/T1/T2
Button
In the run mode, pressing the
/T1/T2
button will scroll to show T1, T2, and T1-T2.
During the configuration mode or Setpoint modes, use the
/T1/T2
button to
change the values of the flashing digit shown on the display and/or toggle between
menu choices, such as "
R.1=F
" or "
R.1=C
". When configuring your setpoint values,
press the
/T1/T2
button to increment the flashing digit from 0 to 9 by 1's.
/DEV
Button
In the run mode press the
/DEV
button to display the deviation of reading from
Setpoint 1.
In the configuration or setpoint modes, press the
/DEV
button to scroll to the next
digit.
Содержание DP26-RTD
