![background image](http://html2.mh-extra.com/html/omega/dp-7600/dp-7600_user-manual_5154771017.webp)
READING MODE: “PV X[CR]”
The display reading mode can be set using this command.
X = 0: Display is set for reading only
X = 1: Display is set for peak
X = 2: Display is set for runout
ABSOLUTE OR RELATIVE “AR X[CR]”
Allows changing of the display mode between absolute and relative.
X = 0
Absolute measurement only (tare is disabled)
X = 1
Relative measurement (tare enabled)
SET FILTER “SF XXX[CR]”
The set filter command can be used to remotely set the rate at which limit detection,
peak/runout tracking, and analog output updates are performed.
XXX = 1 - 500 (Hz)
CALIBRATION SPAN NUMBER “SN X YYYY[CR]”
X = Channel number (1 or 2)
YYYY = Calibration span number
SERIAL READING MODE “SM X[CR]”
X = 0 : Serial read outputs channel #1 (display reading)
X = 1 : Serial read outputs channel #2 reading
X = 2 : Serial read outputs channel #2 peak
X = 3 : Serial read outputs channel #2 runout
LIMIT MODE “LM X N[CR]”
X = Limit number
N = Limit mode, bit defined as follows:
Normal - 01
HEX
Peak
- 02
HEX
Runout
- 03
HEX
Channel #2
- 04
HEX
High limit
- 08
HEX
12
Содержание DP-7600
