6
Remote Starting
- The parking lights will turn on and the status light will flash to confirm the
starting process, and the horn will also chirp 3 times.
- The ignition circuit will turn on.
- Within a few seconds the parking lights will turn off and the starter will engage.
- The engine will start, run, and the starter will be disengaged.
- The parking lights will turn back on and remain on while the Comfort Start is
controlling the engine. The status light will continue to flash slowly.
- If the engine stalls, the Comfort Start will make two attempts to restart it.
When you leave your vehicle, simply set the climate controls for what you
desire to be operating upon remote start - heater, defroster or air conditioning.
THE PARKING LIGHTS
WILL TURN ON, OFF, THE
ENGINE STARTS, THEN
THE PARKING LIGHTS
RESUME ILLUMINATION
To Activate Remote Start:
Press & Release the upper
transmitter START button
*
35
operate the vehicle’s on-board doorlocking relays. If the vehicle’s Negative pulse
doorlocking system requires more than 500mA Negative output, optional relays must be
used.
Negative Pulse System Using
Direct Connection
Doorlock
Actuators
Green Wire To Switch
Door Lock Wire
Door Lock
Switch
Blue Wire To Switch
Door Unlock Wire
+
Vehicle's Doorlock
Relay Control Unit
Unlock
Lock
Control
Module
Ground
Red Connector
