![background image](http://html1.mh-extra.com/html/omega/cnis16/cnis16_user-manual_4049880059.webp)
55
UNIT SUBMENU (not applicable):
Press
d
50)
Display flashes previous selection for
UNIT
.
Press
b
51)
Scroll through the available selections: NO, YES.
Press
d
52)
Display shows
STRD
stored message momentarily and then
advances to
ADDR
only, if it was changed, otherwise press
a
to
advance to
ADDR
Address Setup Submenu.
ADDRESS SETUP SUBMENU:
This menu is applicable to the RS-485 Option only.
Press
d
53)
Display advances to “Address Value” (0000 to 0199)
Submenu.
ADDRESS VALUE SUBMENU:
Press
d
54)
Display flashes 1
st
digit of previously stored Address Value.
Press
b
&
c
55)
Press
b
and
c
to enter new “Address Value”.
Press
d
56)
Display shows
STRD
stored message momentarily and then
advances to
TR.TM
only, if it was changed, otherwise press
a
to advance to
TR.TM
Transmit Time Interval Submenu.
TRANSMIT TIME INTERVAL SUBMENU:
This menu is applicable if “Continuous” Mode was selected in the “Data
Flow Mode” Submenu and the device is configured as an RS-232C
Standard device. Also, one or more options under the Data Format
Submenu must be enabled.
Press
d
57)
Display advances to “Transmit Time Value” Submenu.
TRANSMIT TIME INTERVAL VALUE SUBMENU:
Determines the interval at which data will be emitted to the RS-232 Serial Bus
when the instrument is in Continuous Data Flow Mode.
Press
d
58)
Display flashes 1
st
digit of previous “Transmit Time Value” in
seconds.
Press
b
&
c
59)
Press
b
and
c
to enter new “Transmit Time Value”, e.g.
0030 will send the data every 30 seconds in Continuous Mode.
Press
d
60)
Display shows
STRD
stored message momentarily and then
advances to
COLR
only, if it was changed, otherwise press
a
to
advance to
COLR
Color Display Selection Menu.
For more details, refer to the Communication Manual available at
the website listed on the cover page of this manual or on the
CD-ROM enclosed with your shipment.
Содержание CNiS16
Страница 69: ...NOTES 65...
Страница 70: ...NOTES 66...