![background image](http://html1.mh-extra.com/html/omega/cn616tc1/cn616tc1_user-manual_737599003.webp)
Table of Contents
SECTION
PAGE
SECTION 1 INTRODUCTION . . . . . . . . . . . . . . . . . . .
1.1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4
Overview of operation
. . . . . . . . . . . . . . . . . .
SECTION 2 RS-232 COMMUNICATIONS . . . . . . . . .
2.1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2
RS-232 Cable Connections . . . . . . . . . . . . . . . . . .
2.3
Operating Protocol . . . . . . . . . . . . . . . . . . . . . . . .
2.4
RS-232 PC Screens . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3 INSTALLATION . . . . . . . . . . . . . . . . . . . .
3.1
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Outline Dimensions . . . . . . . . . . . . . . . . . . . . . . .
3.4
Wiring the Power Circuit . . . . . . . . . . . . . . . . . . . .
3.5
Changing Line Voltage Setting . . . . . . . . . . . . . . .
3.6
Sensor Placement . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4 PARTS OF THE CONTROLLER . . . . . . .
4.1
Front of the Controller . . . . . . . . . . . . . . . . . . . . . . .
4.2
Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Back of the Controller . . . . . . . . . . . . . . . . . . . . . . .
4.4
Temperature/Setpoint Display . . . . . . . . . . . . . . .
SECTION 5 “RUN MODE” . . . . . . . . . . . . . . . . . . . . . .
5.1
PID Control Mode . . . . . . . . . . . . . . . . . . . . . . . .
5.2
RAMP and SOAK CONTROL 1 . . . . . . . . . . . . .
5.3
RAMP and SOAK CONTROL 2 . . . . . . . . . . . . .
SECTION 6 SETUP AND OPERATION. . . . . . . . . . . . . . .
6.1
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3
Setup Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4
Model Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5
Setpoints and Alarms . . . . . . . . . . . . . . . . . . . . . .
6.6
PID setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.7
Segment control . . . . . . . . . . . . . . . . . . . . . . . . . .
6.8
Ramp and Soak . . . . . . . . . . . . . . . . . . . . . . . . . .
6.9
Set Autotune . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.10
Run Autotune . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.11
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.12
Start Profile
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1
Thermocouple Ranges . . . . . . . . . . . . . . . . . . . . . . .
SECTION 8 SPECIFICATIONS . . . . . . . . . . . . . . .
2
2
2
3
3
7
7
7
8
12
15
15
15
16
16
17
17
18
18
19
20
21
22
22
22
22
23
24
26
26
26
29
31
33
34
35
35
36
37
38
39
SECTION 1 INTRODUCTION
1.1 Description
The CN616 Series is a second generation of industrial temperature
controllers based on the field proven CN100 six zone temperature
monitor/alarm system. Two models are available, standard and ex-
tended range.
The CN616 Series is a microprocessor based temperature controller,
which accepts signals from thermocouples. Six zones are sequentially
scanned at 15 readings per second [@ 60 Hz] and displayed with a
selectable display rate of 1 to 40 seconds each zone.
A single output
relay is provided to indicate an alarm condition on any one zone. Six
PID time proportional or on/off outputs are provided to control six
zones.
The faceplate has been arranged to call attention to an alarm
condition by flashing the main temperature display and indicating the
zone in alarm with a flashing zone number display. The CN616 Series
implements a security password to protect all functions.
1.2 Features
• Six Zones
• Selectable control mode [PID or On/Off] each zone
• Selectable cooling control mode [On/Off only] each zone
• 20 Segment Profile for each zone
• Selectable number of active zones
• Adjustable Display Time
• Field Proven Zone Switching
• Temperature and Setpoint Monitoring
• Four Digit Display of Temperature
• 1 Digit Display of Zones
• 5 Amp Latching or Non-Latching Relay
• Standard Thermocouples [T,E,J,K,S,R,B,C]
• Extended Ranges [ K and E thermocouple types ]
• Programmable Selection of HI, LO or HI/LO Alarms
• Password Protection
• 1/4 DIN Aluminum Box
• Splash Proof Face
• Plug-In I/O Terminals
• RS-232 Communication
2
Содержание CN616TC1
Страница 9: ...13 14 ...