Omega Lift 50040, Руководство по эксплуатации, Страница: 2 / 36

Figure 1 - 50040 and 50100 Components
2
Oil Filler
Screw
Handle
Release Valve
Plunger
Hose
Hose
Coupler
Ram Coupler
Ram
Dust Cover
Gauge
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Omega Hydraulic Body Repair Kits are designed to be used for pushing, spreading, and pressing of vehicle body
panels as well as various component parts and assemblies. A variety of attachments are included.
SPECIFICATIONS
Model
Pump
Capacity
Ram
Capacity
Ram
Number of
Attachments
Closed Height Extended Height
50040 8,000 psi 4 Ton 10-3/4” 15-5/8” 14
50100 10,000 psi 10 Ton 13-3/4” 19-3/4” 13
When using extension tubes and/or offset attachments, reduce rated capacity by 50% for each tube or
offset attachment connected. See Replacement Parts section on pages 8 & 9 for identification of "offset"
attachments.
WARNING
!