Omcan VP-CN-9200, Инструкция по эксплуатации

Страница: 9 / 20

9
Operation
2. Open the lid and place the open end of the bag down into the sealing gasket area.
3. Close the lid and turn on the appliance.
4. Choose “PULSE VAC” function. Press the start button continually, till it reaches the pressure that you want.
You can watch the vacuum bag to decide the pressure. During this process, you can stop vacuum by stop
pressing the start button, and press it again to vacuum again.
5. When the pressure reaches what it needs, press the “Seal Only” button to start sealing.
6. The indicator number of SEAL TIME counts down to 0 and the working process is done. Lift the lock on the
lid to release the bag.
HOW TO USE THE VACUUM SEALER WITH A CANISTER
NOTE: Canister and hose are not included in the package.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister, insert one end of the hose into port on appliance. Put the other end onto port of
the canister cover; press down firmly to ensure a tight fit.
4. Close the lid and turn on the appliance.
5. Choose “Canister” function and press the start button.
6. The appliance will continue to vacuum until air has been removed.
7. The appliance will stop automatically when the working process is done.
HOW TO MARINATE FOODS
In the marinate mode, the appliance can run two cycles of vacuuming and releasing air to the canister, allowing
foods to get optimum pickle infusion in the least amount of time.
Vacuum canister is a perfect partner to marinating foods. The reason that foods can be marinated in such a
short time is that, it opens the micro-holes of the foods, allowing pickle infusion very quickly.
Important tips: when using canister for marinating, there should be a knob on the canister lid. Make
sure the canister lid is in “Open” status but NOT “Vacuum” status when it is in the marinate process.
1. Put items in the canister. Make sure there is no powder or food debris on the canister lid gasket. Also
please allow some space after the items are put into the canister. And then close the lid for the canister.
2. Turn the knob on the canister lid to “Open” position.
3. Connect the hose to the port on the appliance and the port on the canister lid.
4. Close the lid of the appliance and choose “Marinate” function.
5. Press the start button.
6. When it reaches the vacuum pressure, the appliance will stop vacuuming automatically and then release
air into the canister. This working cycle repeats continually for 30 minutes and then stops automatically.
7. The appliance vacuums the canister again. The above mentioned cycle will be run two times.