www.microscopenet.com
- 2 -
ii.
Care and Maintenance
1. Do not attempt to disassemble any component including eyepieces, objectives or
focusing assembly.
2. Keep the instrument clean; remove dirt and debris regularly. Accumulated dirt on
metal surfaces should be cleaned with a damp cloth. More persistent dirt should be
removed using a mild soap solution.
Do not use organic solvents for cleansing
.
3.
The outer surface of the optics should be inspected and cleaned periodically using an
air stream from an air bulb. If dirt remains on the optical surface, use a soft cloth or
cotton swab dampened with a lens cleaning solution (available at camera stores). All
optical lenses should be swabbed using a circular motion. A small amount of
absorbent cotton wound on the end of a tapered stick makes a useful tool for
cleaning recessed optical surfaces. Avoid using an excessive amount of solvents as
this may cause problems with optical coatings or cemented optics or the flowing
solvent may pick up grease making cleaning more difficult. Oil immersion objectives
should be cleaned immediately after use by removing the oil with lens tissue or a
clean, soft cloth.
4.
Store the instrument in a cool, dry environment. Cover the microscope with the dust
cover when not in use.
