www.microscopenet.com
- 6 -
Fuse
Fuse Holder
Caution:
Before you turn over the microscope, be sure to take the eyepieces off and be certain
that the head is securely locked by the thumb screw.
2.7 Installing the mirror
(optional, may not included in your package)
1) Turn off the power switch and disconnect the power cord.
2) Screw off the light collector on the microscope base.
3) Screw the black disc onto the base and then insert the mirror into the hole at the
center of the black disc. See
Fig. 5
. You may try to get reflected ambient light on
either side of the mirror with different angles for best result.
Note:
The mirror is only used when there is a power failure or you are in the field and no
power is available.
2.8
Installation of the camera
(optional, may not included in your package)
1) Take off the eyepiece from the eyepiece tube.
2) Insert the camera into the eyepiece tube, and then
connect the camera to a computer via USB2.0 cable.
See
Fig.6
.
3) The manual for the camera is on a CD (or mini CD).
Refer to the manual to install the driver and software on
to the computer.
4) The camera is optional and may have different color and shape from the one in the
figure, depending on the model purchased.
2.9 Installation of the darkfield condensers
(optional, may not included in your package)
Please see section 7
(
Darkfield Condenser Installation and Operation Instructions)
2.10 Installation of the phase contrast kit
(optional, may not included in your package)
Please see section 8
(Phase Contrast Kit
Installation and Operation Instructions)
Fig.4
Fig.5
Fig.6
Camera
Light Collector
Mirror
