Siemens V20_EN_rev01-08032019.docx
1-1
1 INTRODUCTION
SIEMENS V20 is an inverter with a specialized software in hydraulic systems, which controls only the up-
ward travel.
These inverters SIEMENS can be applied to both pump units of the old generation, and pump units most re-
cent and modern.
The advantages are:
Absence of starting current peaks. The maximum starting current is the rated current In.
Power factor correction. Cos
ϕ
≥
0.98.
Power saving.
Comfort optimization.
Setting parameters of high/low speed.
Maximum power absorbed from the network adjustable, to reduce the power costs.
Absence of braking resistors.
For further information regarding the functions of the inverter Siemens V20, refer to the relevant manu-
als on the website.
All information, manuals and details, can be found at the internet address:
http://support.automation.siemens.com
.
