Siemens V20_EN_rev01-08032019.docx
9-5
Pressing M once moves the cursor to the rightmost digit of the current item.
Pressing M twice in succession exits the digit-by-digit mode without changing the item being edited.
Pressing OK on a digit when there are no further digits to the left saves the value.
If more digits are required to the left, then these must be added by scrolling the existing leftmost digit
above 9 to add more digits to the left.
Pressing
▲
or
▼
for over two seconds enters fast digit scrolling.
Example 1:
Editing parameter numbers
Example 2:
Editing parameter indices
If a parameter is an array, edit in-
dices as illustrated below:
Example 3:
Editing parameter values
9.2.4
Screen displays
The following two tables show you basic screen displays:
Screen informa-
tion
Display
Meaning
“8 8 8 8 8”
Inverter is busy with internal data processing.
“- - - - -“
Action not completed or not possible
“Pxxxx”
Writable parameter
“rxxxx”
Read-only parameter
“inxxx”
Indexed parameter
