OmarLift SIEMENS SINAMICS V20, Руководство пользователя

Страница: 20 / 34

Siemens V20_EN_rev01-08032019.docx 9-2
Note:
If configured to be an OFF1 stop, this button is inactive in
AUTO mode.
Double press (< 2 s) or
long press ( > 3 s) OFF2 stop reaction: the inverter allows the motor to coast
to a standstill without using any ramp-down times.
I
(RUN)
Starts the inverter
If the inverter is started in HAND / JOG mode, the inverter running icon ( ) displays.
Note:
This button is inactive if the inverter is configured for control from terminals (P0700 = 2,
P1000 = 2) and is in AUTO mode.
M
Multi-function button
Short press ( < 2 s)

Enters the parameter setting menu or moves to the
next screen

Restarts the digit by digit editing on the selected item

If pressed twice in digit by digit editing, returns to the
previous screen without changing the item being edit-
ed
Long press ( > 2 s)

Returns to the status screen

Enters the setup menu
OK
Short press ( < 2 s)

Switches between status values

Enters edit value mode or change to the next digit

Clears faults
Long press ( > 2 s)

Quick parameter number or value edit
M
+
OK
Hand / Jog / Auto
Press to switch between different modes:
Note:
Jog mode is only available if the motor is stopped and it is a mode of operation of low-
speed service.
▲

When navigating through a menu, it moves the selection up through the screens
available.

When editing a parameter value, it increases the displayed value.

When the inverter is in RUN mode, it increases the speed.

Long press (> 2 s) of the key quickly scrolls up through parameter numbers, indices,
or values.
▼

When navigating through a menu, it moves the selection down through the screens
available.

When editing a parameter value, it decreases the displayed value.

When the inverter is in RUN mode, it decreases the speed.

Long press (> 2 s) of the key quickly scrolls down through parameter numbers, indi-
ces, or values.
▲
+
▼
Reverses the direction of rotation of the motor. Pressing the two keys once activates re-
verse motor rotation. Pressing the two keys once again deactivates reverse rotation of
the motor. The reserve icon (
) on the display indicates that the output speed is oppo-
site to the setpoint.