43
Open your Basic Router Setup (or WAN Settings or similar, depending on router) and note the WAN IP
Address value.
In the Remote Control software,
open the Manager Settings. Enter
the IP Address and Port number
you set up previously in your
router. IP Address is the WAN IP
Address from the basic setup page
and the Port number is the Port (or
Public Port if separate) from the
port forwarding page.
Now you are ready to work with OM4001A over the internet.
7.5. OM4001A firmware upgrade
Download the firmware upgrade software and latest firmware file for the OM4001A from the
official OM Power website http://www.om-power.com/downloads. Store it to OM4001A folder
created on your PC.
NOTE:
Use a serial null modem cable and connect the TCVR port on the OM4001A rear panel
with a COM port on the PC.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
