20
The INFO settings allows
viewing all of the previous PA
INFORMATION screen plus the
addition of one more touch key
to enter the UPGRADE mode.
UPGRADE
touch
button
should ONLY be used if the
EEPROM or firmware files (or
both) will be upgraded. In such
a case ask the dealer or
manufacturer for the exact
procedure.
5.3. Preparing for operation
In STBY the amplifier is in bypass-mode and your transceiver is directly
connected to the antenna. Maximum allowed power in bypass mode is 200 Watts!
The bypass
RF power is displayed if PA is in standby mode.
To turn PA ON press ON/OFF button on the front panel (black one) and
hold it abt. 1 second
.
PA will start tube heating. It will take 180 seconds. Turning PA ON is possible
ONLY
from the
home screen! If you have other display active, press EXIT more times to go back to the home
screen. (These same functions are also available on the OM Power Remote Control PC
Application)
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
