26
5.4. Operation mode
Before switching to operation mode, check all connections between PA and
TCVR.
We are now back in the
Main
display
,
bar
graphs
defined,
antennas preprogrammed, CAT was
set. We are ready to go to the
operation mode.
Press the black
STBY/OPER
button
on the front panel.
We are now in OPERATE mode.
Note the light indicator on the touch
Screen has changed to
OPERATE
.
Press
MENU
.
Now try to press PTT (foot switch for
example).
We are now in TRANSMIT mode
(without RF).
Note the new
TRANSMIT
light
indicator on the touch screen.
We also have a new
M-TUNE
button
here.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
