32
This is an example from a previous attempt
at transmitting when the antenna was
disconnected from the PA . Reflected
power was higher than 250W and a
warning message “Reflected power too
high” appeared.
If you touch the yellow “last events” box on
the PA touch screen it will display the
warning details.
In the case of hardware failure or if your
power amplifier is not working properly,
please contact the manufacturer or your
local dealer.
Never try to change or move any part inside the amplifier except the tube or fuses.
Substitution of parts may void intrinsic safety!
Manufacturer’s contacts: OM POWER, s.r.o.
930 30 Bá
č
126
SLOVAKIA
Email: [email protected]
Dealer in the USA:
Array Solutions
2611 North Belt Line Road
Suite # 109
Sunnyvale, TX 75182
Tel:
(214)954-7140
Email:
sales@arraysolutions
.
com
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Содержание OM2000A+
Страница 39: ...39 Connection setting Set up TCP IP address and port Connect disconnect to OM2000A...
Страница 49: ...49 7 7 ICOM connection with OM2000A...
Страница 50: ...50 7 8 Yaesu plus BPF plus ANT Switch connection with OM2000A...
Страница 55: ...55 7 10 Block Diagram of the OM2000A Power Amplifier...
