OM POWER OM2000+, Руководство пользователя

Страница: 12 / 35

11
5. OPERATION
WARNING!
Before switching PA on, make sure that amplifier is grounded, antenna or dummy load is connected,
and line cord is putted to the outlet. Be sure you selected AC input by 7.1.
CAUTION
Before switching PA on, check all connections between PA and TCVR.
CAUTION
Do not turn PA on for at least 2 hours after unpacking it and locating in its operating location.
Especially when amplifier is moved from a cold place to a warm one because not visible
condensation may develop, and this could result in damage to the high voltage circuits of the PA.
CAUTION
Never try to change antenna output during a transmission to avoid warranty loss.
NOTE
When you decide to have a short operating break, place the amplifier to the standby mode rather than
switch it off.
5.1. Operation elements
There is couple of operational elements accessible or visible on the front panel.