OM POWER OM2000+, Руководство пользователя

Страница: 14 / 35

13
ON AIR - Transmitting mode LED
STBY - Standby mode LED
FAULT - Failure LED
ON - PA is „ON“ LED
S1 - OPER / STBY - Press to switch between Standby and Operation mode
ESC - Return to the previous level
S2 - MENU - Enter the Menu
DOWN - Scroll down
S3 - DSP - Change display (DSP1, DSP2, DSP3)
UP - Scroll up
S4 - ANT - Change Antenna output (ANT1, ANT2, ANT3)
ENT - Confirm the selection
More functions of S1-S4 buttons will be described in next parts of this manual.
5.2. Preparation for use
The first necessary thing after connecting AC to the power amplifier is switching main (green) switch
to „ I “. Welcome message and then starting information appears on the display:
After switching main switch ON welcome
message appears shortly.
Starting message shows which antenna is
connected. To switch PA ON press ON-OFF
button for abt. 1 second.
Warming time takes abt. 210 seconds. It is
possible to enter
MENU during this time, but
with limited possibilities (display settings can
be changed, for example).
You can change
ANT output, if necessary.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.