Olympus XZ-1, Инструкция по эксплуатации

Страница: 59 / 94

59
EN
For information on using the menus, see “Using the Menus” (p. 6).
Resetting fi le numbering [File Name] Resetting fi le numbering [File Name]
x (Setup menu) X File Name
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
P m dd
Folder name Folder name File name
DCIM 100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering Automatic
numbering
Submenu 2 Application
Reset
File numbering is reset when a new
card is inserted
*1 (choose when
organizing images by card).
Auto
When a new card is inserted, fi le
and folder numbering continue from
the previous card (choose when
organizing images by
fi le and folder
number).
*1 Folder numbering is reset to 100, fi le numbering to
0001.
Adjusting the CCD and the image Adjusting the CCD and the image
processing function [Pixel Mapping]
processing function [Pixel Mapping]
x (Setup menu) X Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the CCD and the image To adjust the CCD and the image
processing function
processing function
Press
A
when [Start] (Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
[[
s s ]]
x (Setup menu) X s
Adjusting monitor brightness Adjusting monitor brightness
1 Use FG to adjust (the effect can be viewed in the
monitor), and then press A .
s
Back Set
●