E-9
En
Preparing the case
Before shooting, prepare the case as described below.
Attaching/detaching the diffuser
The Case is provided with a diffuser to reduce the intensity of the light emitted by the flash.
You can use the diffuser to reduce the amount of flash light directed at the subject, to minimize
shadows produced by the illuminated subject, or reduce the light intensity of the flashlight.
Attach or detach the diffuser as shown in the following illustrations.
：
The diffuser makes it possible to reduce flash intensity by about 3 steps
compared an undiffused flash. The diffuser is especially useful when you
need to temporarily reduce the flash intensity for close-up macro shooting.
CAUTION
Connection to the camera case
To perform underwater TTL shooting using this case, connect the underwater TTL cable
between this case and the camera case. Connect the hot shoe cable (provided with this
case) between the TTL cable connector in the camera case and the camera
'
s hot shoe.
1) Connecting the underwater TTL cable
After making sure the Case is dry, loosen and remove the TTL cable connector cap on
the Case so you can connect the underwater TTL cable to the TTL cable connector on
the Case (you can use the connector at either end of the cable). Before connecting,
apply a thin layer of the silicone grease provided with the Case to the thread of the
TTL cable connector.
PFL̲E01̲E 2005.5.25 4:36 PM ページ9
