E-14
En
3. Inserting the electronic flash.
Checking the electronic flash
Loading the batteries
Insert two of any of the following types of batteries: LR6 alkali batteries, lithium batteries,
nickel-manganese batteries, MH batteries, Ni-Cd batteries (KR-15/51) or Oxyride
batteries (XR6Y) as shown in the illustration. The CR-V3 lithium battery pack (Olympus
product LB-01) can also be loaded.
* "AA"-size manganese batteries cannot be used.
Open the battery compartment cover.
Insert batteries in the correct orientations.
Close the battery compartment cover.
Checking the batteries
Press the power button to switch the
electronic flash on.
Confirm that the charge lamp lights up.
Press the power button again to switch
the electronic flash off.
Note
：・
To avoid running out power during shooting, it is recommended to load fully
charged batteries before every diving session.
Inserting into the case
Which electronic flashes can be used?
The product (PFL-E01) is exclusively for use with the FL-36 Electronic Flash.
"AA"-size batteries
CR-V3
PFL̲E01̲E 2005.5.25 4:36 PM ページ14
