Olympus OEV261H Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 105

Olympus OEV261H Скачать руководство пользователя страница 10

6

Important Information — Please Read Before Use

High definition LCD monitor OEV261H

• To reduce the risk of fire or shock hazard, do not expose this

equipment to rain or moisture.

• To reduce the risk of fire or shock hazard, keep this

equipment away from all liquids. Use and store only in
locations which are not exposed to the risk of dripping or
splashing liquids, and do not place any liquid containers on
top of the equipment.

• Do not use this instrument beyond the rated outlets and

wiring, otherwise it may result in fire or an electrical shock.

• Always power the monitor with the voltage specified in this

manual. Supplying a nonspecified voltage to the monitor may
result in fire or an electric shock.

• This product has a fluorescent lamp that contains a small

amount of mercury. It also contains lead in some
components. Disposal of these materials may be regulated in
your community due to environmental considerations. For
disposal or recycling information, please contact your local
authorities or the Electronics Industries Alliance.

• Strictly observe the following precautions for the power cord.

Damaging the power cord may result in fire or an electric
shock:

−

When placing the power cord, take care that it is not
crushed in the space between the monitor and a wall,
mobile workstation or a shelf.

−

Do not modify or damage the power cord.

−

Do not stretch or place a heavy object on the power cord.

−

Do not place the power cord near heating equipment or
expose it to excessive heat.

−

Always grasp and pull the plug when unplugging the
power cord. Do not pull on the cord itself.

• Be sure to use the supplied AC adapter. Do not use the

supplied AC adapter for powering other devices. The
equipment may fail or the power cord may burn.

• If an irregularity is suspected during use of the instrument,

stop operation of the monitor. Some problems may be
correctable by referring to the following procedure. Damage
or irregularity in the instrument may compromise patient or
operator safety and may result in more severe equipment
damage.

«
...
8
9
10
11
12
...
»

Содержание OEV261H










































































































Отзывы:

Нет отзывов