manualshive.com logo in svg

Olympus OER-Elite, Руководство по эксплуатации, Страница: 115 / 138

Поделиться
Скачать
Olympus OER-Elite Скачать руководство пользователя страница 115

4.16 Auxiliary water tube cleaning setting

105

OER-Elite OPERATION MANUAL

Ch.4

No.

Item/Button

Setting options

Description

1

Auxiliary Water 

Tube Cleaning 

Setting

OFF (default)

Disables the auxiliary water tube cleaning setting.

ON

Auxiliary water tubes (MAJ-855 or MAJ-2021) can be reprocessed 

simultaneously with endoscopes with water jet function by using 

dedicated connecting tube MAJ-2138.

2

Cancel

–

Returns to the Setting menu without saving the selected setting.

3

Save/OK

–

When the “OFF” is selected, “Save” button is displayed here. 

Press this button to return to the setting menu after saving the 

selected setting.

When the “ON” is selected, “OK” button is displayed here. Press 

this button to go to the confirmation screen about activating this 

setting.

NOTE

The selected settings are displayed with white buttons.

3

When “ON” was selected in the setting, this 
confirmation screen is displayed. Read the 
description and press the “Save” button to save 
the setting.

Figure 4.3

1

2

3

Содержание OER-Elite











































































































































Отзывы:

Нет отзывов