Olympus OER-Elite Скачать руководство пользователя страница 109

Страница: 109 / 138

4.14 Filter replacement indicator

OER-Elite OPERATION MANUAL

Ch.4

When this setting is activated, the reprocessor displays the filter replacement indicator when day

counts of each filter reach the set value. After reaching the set value, a pop-up message screen opens

soon after powering ON the reprocessor. When this setting is activated, the reprocessor counts the day

count (number of days of the each filter is effective after replacement) after each replacement of filters.

If the day counts reach the set value, both the message and the filter replacement indicator are

displayed on the touch screen.

NOTE

• For details of indicator, refer to Section 3.2, “Alarm indicator”.

• When replace the consumable item after changing date and time, the filter

replacement indicator might not be displayed incorrectly.

4.14 Filter replacement indicator

Select “Filter Replacement Indicator” on the Setting menu.

Select each setting from options. To change the setting value, press “Edit” button.

Содержание OER-Elite











































































































































Результаты поиска

Содержание OER-Elite

Отзывы:

Olympus OER-Elite, Руководство по эксплуатации, Страница: 109 / 138

Результаты поиска

Содержание OER-Elite

Отзывы: