manualshive.com logo in svg

Olympus OER-Elite, Руководство по эксплуатации, Страница: 111 / 138

Поделиться
Скачать
Olympus OER-Elite Скачать руководство пользователя страница 111

4.14 Filter replacement indicator

101

OER-Elite OPERATION MANUAL

Ch.4



Editing the set value for water filter

NOTE

The selected settings are displayed with white buttons.

No.

Item/Button

Setting options

Description

1

Pre-filtering

With the pre-filter

When the pre-filter is used, select this option to expand the setting 

range of day count up 180 days.

Without the 

pre-filter (default)

When the pre-filter is not used, select this option to restrict the 

setting range of day count 30 days.

2

Days

1 – 180 [days] 

or

1 – 30 [days] 

(default: 30)

Sets the set value of days for the filter replacement indicator of 

water filter.

Pressing the “+” button increments the setting and pressing the 

“–” button decrements it.

The setting range varies depending on the usage of pre-filter.

3

Cancel

–

Returns to the previous screen without saving the edited 

information.

4

OK

–

Returns to the previous screen after saving the edited information.

1

3

2

4

Содержание OER-Elite











































































































































Отзывы:

Нет отзывов