manualshive.com logo in svg

Olympus E10 - CAMEDIA E 10 Digital Camera SLR, Инструкция по эксплуатации

Олимпус E10 - Фотоаппарат CAMEDIA E 10 Digital Camera SLR обеспечивает профессиональное качество изображений. Ищете Инструкцию по эксплуатации? Вам нужен мануал? Скачайте бесплатно на {веб-сайте}. Получите подробные руководства для настройки камеры и достигайте лучших результатов при фотосъемке.

Поделиться
Скачать
background image

Thank you for purchasing the Camedia E-10. To ensure years of reliable and enjoyable
service, please read this instruction manual carefully and use the camera safely. Store
this instruction manual in a safe location where you can find it for future use.

Copyright
© Copyright 2000. Olympus Optical Co., Ltd. All rights reserved.

IMPORTANT NOTICES

Legal and other notices
• The contents of this document are subject to change without prior notice.
• Although the contents of this document have been carefully checked to avoid errors, some may

still occur. If you have a question about any point, or you find mistakes or omissions, please
contact us.

• No part of this publication may be reproduced or reprinted except for personal use without prior

written permission from Olympus.

• Olympus makes no representations or warranties regarding any damages, or benefit expected by

using this unit lawfully, or any request from a third person, which are caused by the inappropriate
use of this product.

• Olympus makes no representations or warranties, regarding any damages or any benefit

expected by using this unit lawfully, caused by erasing picture image data.

Radio and Television Interference
Change or modifications not expressly approved by the manufacturer may void the user’s authority
to operate this equipment. This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Only the included USB cable should be used to connect the camera to a personal computer.

Trademarks
• IBM is a registered trademark of International Business Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• Macintosh is a trademark of Apple Computer, Inc.
• CompactFlash and CF are trademark of San Disk Inc.
• All other company and product names are registered trademarks of their respective owners.

Declaration of Conformity
Model Number:

E-10

Trade Name:

OLYMPUS

Responsible Party:

Olympus America lnc.

Address:

2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A.

Telephone Number:

631-844-5000

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause

undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Downloaded From camera-usermanual.com

Содержание E10 - CAMEDIA E 10 Digital Camera SLR












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для E10 - CAMEDIA E 10 Digital Camera SLR

Datalogic Memor Quick Manual preview
Memor
Бренд: Datalogic Страницы: 2
Velleman VL9878 User Manual preview
VL9878
Бренд: Velleman Страницы: 15
Mec 24V/200Ah Series Instruction Manual preview
24V/200Ah Series
Бренд: Mec Страницы: 4
Stanley Fat Max SFMCB11 Original Instructions Manual preview
Fat Max SFMCB11
Бренд: Stanley Страницы: 60
Naxa NAP-5002 User Manual preview
NAP-5002
Бренд: Naxa Страницы: 9
Deltran Battery Tender 022-0227 Manual preview
022-0227
Бренд: Deltran Battery Tender Страницы: 33
NOCO Genius G7200 V2.0 User Manual preview
G7200 V2.0
Бренд: NOCO Genius Страницы: 160
Icom BC-218 Instructions preview
BC-218
Бренд: Icom Страницы: 2
GP powerbank V600D Instruction Manual preview
powerbank V600D
Бренд: GP Страницы: 4
MAKINEX MCP-6-SS Operator'S Manual preview
MCP-6-SS
Бренд: MAKINEX Страницы: 23
ardistel 3D-XTRA LIFE Instruction Manual preview
3D-XTRA LIFE
Бренд: ardistel Страницы: 2
efacec EFAPOWER EV-QC24S Installation And User Manual preview
EFAPOWER EV-QC24S
Бренд: efacec Страницы: 32
Victron energy 12/100 User Manual preview
12/100
Бренд: Victron energy Страницы: 51
Radio Shack 5-Hour AA & AAA Ni-Cd/Ni-MH Battery Charger User Manual preview
5-Hour AA & AAA Ni-Cd/Ni-MH Battery Charger
Бренд: Radio Shack Страницы: 4
XD COLLECTION P322.41 Series Manual preview
P322.41 Series
Бренд: XD COLLECTION Страницы: 28
XD COLLECTION P322.40 Series Manual preview
P322.40 Series
Бренд: XD COLLECTION Страницы: 28
XD COLLECTION P322.42 Series Manual preview
P322.42 Series
Бренд: XD COLLECTION Страницы: 36
XD COLLECTION P322.80 Series Manual preview
P322.80 Series
Бренд: XD COLLECTION Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды