Olympus E-P1 - Digital Camera - Prosumer, Инструкция по эксплуатации

Страница: 59 / 164

59
EN
3
Fo
cu
si
ng and
shootin
g function
s
Selecting the AF target mode and position
Select the AF target mode or select the AF target to use with Single target AF mode.
1
Using [AF AREA] select
M
to enable selection of the AF target mode and
position.
2
Use the main dial and sub dial or arrow pad to
select the AF target.
Selecting the position of the AF target with the
arrow pad.
j
Press the shutter button halfway and release it, then use
the arrow pad to change the position of the AF target.
g “
n
FUNCTION” (P. 102)
Registering an AF target mode
You can register a frequently used AF target mode and the position of that AF target. You can
then quickly load that registered setting (“home position”) and use it when shooting.
Registering
1
In the screen of Step 2 of “Selecting the AF
target mode and position” (
g P. 59), press
the
<
button and F button at the same time.
• The home position is registered at the time the
buttons are pressed.
• The home position cannot be registered when
operated from a menu.
Shooting
To use this function, you must assign the [ P HOME] function to the < button in advance.
g “ ; FUNCTION” (P. 100)
1
Press the < button.
• The registered home position is selected. Press this button again to switch to the original AF
target mode.
TIPS
Set to
B
.
250 250 250 F5.6 F5.6
P
HP
Indicates that the AF target is
being registered.
s0019_e_00_0_unified.book Page 59 Friday, April 24, 2009 9:21 AM