background image

This device complies with the requirements of both directive 2004/108/EC concerning electromagnetic com-

patibility and directive 2006/95/EC concerning low voltage.

In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equip-

ment, this symbol indicates that the product must not be disposed of as unsorted municipal

waste, but should be collected separately.

Refer to your local Olympus distributor in EU for return and/or collection systems available in your

country.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC WARNING:

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Содержание DP72









































Отзывы: