Olympus DP72, Инструкция по эксплуатации

Страница: 28 / 40

25
EXTERNAL TRIGGERING
}When the DP2-BSW basic software is used, the DP72 can record still images or control a commercially available shutter
based on an external trigger signal.
· The external trigger function is not available with the DP2-TWAIN.
· The trigger input function is for the present unavailable even with the DP2-BSW. It will be made downloadable as soon as
it is ready.
Trigger Input
· The trigger input from external equipment can be used to start still image recording using the DP2-BSW.
· The trigger input is detected at the edge, and the positive and negative logics can be switched with the DP2-BSW.
· The trigger input is not compatible with random triggering. Due to a time lag of 150 to 600 ms after the trigger input, the
exposure start time cannot be synchronized completely.
For details on the time lag from the trigger input to the start of exposure, see table below.
· The trigger input is a TTL compatible signal.
V
IH
: 2.0 V (min.). V
IL
: 0.8 V (max.).
Trigger input
Exposure
Readout &
transfer to
PC
150 to 600 msec.
5 msec. or more
Trigger Input Timing Chart (Positive logic)
Table Time Lag from Trigger Input to Exposure Start
Recording Image Size Preview Status at Trigger Input
Time Lag from Trigger Input to Exposure Start (msec.)
Min. Max.
4140 x 3096
2070 x 1548
1360 x 1024
680 x 512
OFF 150 400
ON 210 600
680 x 510
(2 x 2)
OFF 150 350
ON 210 500
340 x 250
(4 x 4)
OFF 150 300
ON 210 450