Olympus DP72, Инструкция по эксплуатации

Страница: 15 / 40

DP72
12
Optional DP72-PXU (Figs. 4 & 5)
1. Using a Phillips screwdriver, remove the six screws @ clamping the top
cover of the extension box and then remove the cover.
2. Remove the bracket clamping screw ².
3. Connect the PCIe interface board ³ with low-profile bracket to the
connector |.
4. Connect the connector
5
to the PCIe interface board.
5. Attach the clamping screw ² removed above.
6. A thermal conduction sheet
6
is attached on the back of the top cover.
Remove the tapes † and the protective sheet
8
carefully so as not to
displace the thermal conductive sheet (Fig. 5).
7. Place the top cover in the original position and attach the clamping
screws @.
Installing the PCIe Extension Box (Fig. 6)
}The PCIe extension box can be installed either horizontally or vertically.
Horizontal Installation
Place the PCIe extension box on the desktop so that the surface with
rubber feet faces down.
Vertical Installation
Attach the provided plates @ to the side panel of the extension box
using provided screws ².
8
³
Fig. 4
|
Fig. 5
@
²
5
6
@
7
6
Fig. 6
@
²
@