67
This section describes the functions available when the DP21-SAL is connected to a microscope through a control box.
}The power switches should be set to ON in order of; 1) control box; 2) contror box D21-CB. Otherwise, the control box
cannot be recognized.
Auto scale switching
When the objective in the revolving nosepiece of the microscope is switched, the displayed scale is automatically
switched according to the newly selected observation magnification.
To use this function, It is necessary to input the magnifications of the objectives in use in the DP21-SAL in advance. This
input can be done by following the Microscope Setting Wizard that is displayed the first time the power is switched ON.
If you have already started up the DP21-SAL, the objective magnifications can be input with the following procedure.
Displaying the scale
Set [ON/OFF] @ in the Menu window to [ON] to display the scale.
Setting the scale magnification
1. Select the scale setting button ² in the Menu window to open the scale
setting window.
2. Select the microscope setting button
3
. The Microscope Setting Wizard
starts.
Operation using the hand switch D21-HS
Adjust the scale value by pressing cursor buttons
, and change the
adjusted position by pressing cursor buttons . Press the SET/OK
button to advance to the next window.
Operation using the mouse
Click on the position to be adjusted and adjust its value by means of
scrolling of a pull-down menu. The value can also be input directly from
the keyboard. Click on [Next] to advance to the next window.
1
²
³
8-3 Operation
Downloaded from
Содержание DP21-SAL
Страница 81: ...MEMO Downloaded from ManualsNet com search engine...
Страница 82: ...MEMO Downloaded from ManualsNet com search engine...
Страница 83: ...Downloaded from ManualsNet com search engine...
Страница 84: ...AX8233 02 Manufactured by Distributed by Downloaded from ManualsNet com search engine...