66
DP21-SAL
Installation of U-HSEXP
}The U-HSEXP is composed of the U-HSEXP switch (fixed by magnet) and circular iron plates (adhesive). Two circular
plates are provided, with one of them intended for use as the spare.
1. Attach the switch @ on the center of the circular plate ² by means of
magnet.
Do not remove the backing sheet of the circular plate until the final fixing
position is decided.
2. Decide the final fixing position that is most convenient for controlling the
switch from the area
3
(indicated by
in the figure) near the coarse
adjustment knob on the left or right.
}Please note that if the attaching position of U-HSEXP is too close to the
coarse adjustment knob, it may touch the pre-focusing lever.
3. Clean the final fixing position with absolute alcohol, remove the backing
sheet from the round plate and apply it securely on the final fixing posi-
tion.
If there is an article with magnetic field near the U-HSEXP,
equipment failure or malfunction may result. So do not let such
an article as listed below come close to the U-HSEXP.
· PC
· Mobile phone
· Clock/watch
· Credit card
· Bank card
· Floppy disk, etc.
}It cannot be recorded by the shutter switch. Use the hand switch D21-HS
to start/finish recording. (p.25)
1
2
3
CAUTION
Downloaded from
Содержание DP21-SAL
Страница 81: ...MEMO Downloaded from ManualsNet com search engine...
Страница 82: ...MEMO Downloaded from ManualsNet com search engine...
Страница 83: ...Downloaded from ManualsNet com search engine...
Страница 84: ...AX8233 02 Manufactured by Distributed by Downloaded from ManualsNet com search engine...