65
4
a
M
en
u s
et
tin
g m
et
ho
d
• Select the memory with an alarm
playback file using the + or – button
and press the
OK
or
9
button.
The recorder will move to the folder
settings with the file with alarm
playback.
• Select the folder using the + or
– buttons and press the
OK
or
9
button to move to file selection.Use
the + or – button to select the file in
the same way.
2
Press the
OK
or
9
button to exit
[
Playback File
] selection.
6
Completing the setting.
1
Pressing
+
or
−
button to select
[
Finish
].
2
Press the
OK
or
9
button to
complete the setup screen.
Programmed settings will be applied
and the screen will return to the preset
number selection menu. If the [
On/Off
]
setting is set to [
On
],
will appear on
the display.
a
When setting to [
On
]
Menu setting method
Select [
Every Week
] and press the
OK
or
9
button to move to the selection of
[
Day
]. Press the + or – button to select a
day of the week.
2
Press the
OK
button to exit [
Day
]
selection.
[Start Time] setting:
1
Press the
9
or
0
button to
select "Hour"and "Minute" in the
[
Start Time
] and "Hour" and "Minute"
in the [
Stop Time
].
2
Press the
+
or
–
button to set.
3
Press the
OK
button to exit [
Start
Time
] selection.
[Volume] setting:
1
Press the
+
or
–
button to adjust the
volume. Press the
PLAY
`
button to
check the volume.
2
Press the
OK
button to exit [
Volume
]
selection.
[Alarm Sound] setting:
1
Press the
+
or
–
button to select an
alarm sound from among [
Alarm1
],
[
Alarm2
] and [
Alarm3
]. Press the
PLAY
`
button to check the alarm
sound.
2
Press the
OK
button to exit [
Alarm
Sound
] selection.
[Playback File] setting:
1
Press the
+
or
–
button to select from
[
No File Play
], [
File Select
].
[
No File Play
]: Sounds alarm only.
[
File Select
]: Plays back a selected file
after the alarm.
• When [
File Select
] is selected and
the
OK
or
9
button is pressed, the
recorder will move to the [
Memory
Select
] setting.
When setting other preset numbers,
repeat Steps 2 through 6.
When the
9
button is pressed in the
Select in Advance Menu, the settings
selected can be confirmed.
7
Press the
F
or
STOP
4
button to
complete the setting.
• The
will appear on the display.
